Remove Advertising Remove Firmware Remove InfoSec
article thumbnail

Hacking IoT & RF Devices with BürtleinaBoard

Security Affairs

Flashing Firmware: Flashing BUSSide firmware inside the NodeMCU is quick and easy: # apt-get install esptool # git clone [link] # esptool --port /dev/ttyUSB0 write_flash 0x00000 BUSSide/FirmwareImages/*.bin. his majesty, the Firmware). In a couple of minutes you should get extracted the firmware. What do you do?

IoT 145
article thumbnail

How to Reverse Engineer, Sniff & Bruteforce Vulnerable RF Adult Toys with WHID Elite

Security Affairs

With all these data we can finally compose the packet that is transmitted to trigger the Vibration mode: Now we are ready to give it a try with the Standalone Firmware of WHID Elite and see if it is able to decode them too. Which means, we can easily fuzz and thus exhaust the space between them with the main WHID Elite Firmware.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Hacking Radio Blasting Systems for Fun & Explosions

Security Affairs

While driving to work I have seen the advertisement of a Fireworks Festival that’s going to happen in the city. With all these data we can finally compose the packet that is transmitted to trigger the 1st charge on Area 01: Now we are ready to give it a try with the Standalone Firmware of WHID Elite and see if it is able to decode them too.

Hacking 105
article thumbnail

[Full-Disclosure] HideezKey 2 FAIL: How a good idea turns into a SPF (Security Product Failure)

Security Affairs

This will help me later in the case I will be able to obtain a firmware that eventually is encrypted (i.e. Just to be 100% sure I won’t fry the board while attempting the firmware dump, I double-checked with the multimeter that the pinout of the SWD interface was still correct. known-plaintext attack). And indeed it was!

Firmware 105
article thumbnail

Hacking IoT devices with Focaccia-Board: A Multipurpose Breakout Board to hack hardware in a clean and easy way!

Security Affairs

Successfully dumped the smartlock’s firmware. And after having successfully dumped the firmware we can proceed at extracting some valuable evidences for the forensics case. Copyright (C) 2014-2015 Media.net Advertising FZ-LLC All Rights Reserved -->. Copyright (C) 2014 Media.net Advertising FZ-LLC All Rights Reserved -->.

IoT 127
article thumbnail

USBsamurai for Dummies: How To Make a Malicious USB Implant & Bypass Air-Gapped Environments for 10$. The Dumb-Proof Guide.

Security Affairs

With this article I wanna bring more light regarding: Which are the differences between C-U0007 & C-U0012 How to Build USBsamurai with a C-U0012 How to flash the C-U0012 with the LIGHTSPEED Firmware How to Flash the C-U0007 with the G700 firmware to achieve better performances and get the Air-Gap Bypass feature How to setup LOGITacker.